Differences

This shows you the differences between two versions of the page.

--- repeaters [2024/01/31 10:37] – created admin
+++ repeaters [2024/02/01 12:55] (current) – [Repeater basic protocol and manners] admin
@@ Line 1: / Line 1: @@
 ====== Ham Radio: Using Repeaters ======
-What is a repeater? And why use it?
-Who’s allowed to set up a repeater?
-How and why is access controlled?
-Configuring a radio for repeater usage
-Finding  repeaters in your area
-Sample basic repeater session
-Repeater basic protocol and manners
-A simple repeater session
-Linked Repeaters
 ===== What is a repeater? And why use it? =====
@@ Line 17: / Line 7: @@
 Why is this useful?
-You can greatly increase the range of your handheld or mobile radio. Repeaters are usually set up at high locations with good quality antennas and higher transmit power than your device.
+  * You can greatly increase the range of your handheld or mobile radio. Repeaters are usually set up at high locations with good quality antennas and higher transmit power than your device.
-Repeaters can be physically or remotely linked to other repeaters. With different kinds of links, you can reach an entire metropolitain area, or even across the world through repeater-to-repeater Internet links.
+  * Repeaters can be physically or remotely linked to other repeaters. With different kinds of links, you can reach an entire metropolitain area, or even across the world through repeater-to-repeater Internet links.
 Repeaters are generally set up to operate with FM modulation on the amateur bands within  the  VHF (30 MHZ – 300 MHZ) and UHF frequencies (300 MHZ – 3 GHz). These are generally the frequencies used by handheld and mobile devices.
 Who’s allowed to set up a repeater?
-In Canada, there is one legal and one practical requirement.
+In the United States, there is one legal and one practical requirement.
+  * You must have your amateur radio advanced license
+  * There must be an available repeater frequency within the band.
-You must have your amateur radio advanced license
-There must be an available repeater frequency within the band.
 Each repeater has a unique call sign and transmit frequency assigned.
 ===== How and why is access controlled? =====
-Access to repeaters is controlled by an inaudible tone called a CTCSS or PL tone.
+Access to repeaters is controlled by an inaudible tone called a [[https://en.wikipedia.org/wiki/Continuous_Tone-Coded_Squelch_System|CTCSS or PL tone]].
 A repeater only repeats if it detects the tone. This prevents the receiver from constantly transmitting background noise that may be at a high enough level to trigger transmission. Constantly transmitting on a frequency is illegal, so this saves everyone a lot of grief and unnecessary power usage.
@@ Line 54: / Line 46: @@
   * (2) automatically shift to the repeater’s receive frequency when you transmit
   * (3) automatically add the CTSS tone when you transmit.
-Consult your radio documentation for how to configure it for repeater operation. On most modern radios, you can program in presets for multiple repeaters. We have examples in our Baofeng UB-B6 user guide  for how to do it manually , and how to do it with radio programming software.
+Consult your radio documentation for how to configure it for repeater operation. On most modern radios, you can program in presets for multiple repeaters.
 ===== Linked Repeaters =====
@@ Line 60: / Line 52: @@
 Some clubs have multiple repeaters linked together. Whatever is transmitted to one repeater is sent out from all the other repeaters.  The repeaters are usually linked by radio using directional antennas, but other connection types like Internet are possible. For emergency preparedness and disaster planning purposes, radio links are preferred.
-The London, Ontario Southern Ontario Repeater Team has a great site with a diagram of how it’s done.  They also list different “Net” times where groups meet on the repeater for different purposes.
+On the [[linked_repeaters|Linked Repeaters]] page, there is information regarding local linked repeater systems.
-York Region Amateur Radio Club’s  Repeater Page  lists their linked repeaters. They are included in our radio programming sample file.
+They also list different “Net” times where groups meet on the repeater for different purposes.
 ===== Finding  repeaters in your area =====
@@ Line 82: / Line 73: @@
   * Don’t be afraid to identify yourself as a beginner. Ham operators are generally very courteous and love to help.
   * In the examples below, we use:
-  * callsign VA3NUB (newbie!). You should use your own.
+    * callsign VA3NUB (newbie!). You should use your own.
-  * frequency 123.456. Identify the frequency and/or call sign of the repeater before you start. It’s good to know and to inject into your intro because in the case of linked repeaters, it identifies which one you are on.
+    * frequency 123.456. Identify the frequency and/or call sign of the repeater before you start. It’s good to know and to inject into your intro because in the case of linked repeaters, it identifies which one you are on.
   * Verify that you are allowed on the frequency. If you have a Basic license (in Canada),  you are not allowed to transmit below 30 MHz or to use a repeater or set of linked repeaters that transmit below 29.5  MHz. The exception to 29.5 MHz for repeaters is because you may be listening at 30 MHz (or just above), and the standard frequency offset for repeaters in the VHF 2m band is -600 KHz.
   * Keep it short. Don’t blabber on. Give other people a chance to join in or respond.
@@ Line 93: / Line 84: @@
   - Listen to see if anyone is else is talking. There may be a net or other conversations already happening.
   - Start with
-  * “VA3NUB listening”
+    * “VA3NUB listening”
-  * Better: “VA3NUB listening on 123.456″. Because you could be on one of a set of linked repeaters.
+    * Better: “VA3NUB listening on 123.456″. Because you could be on one of a set of linked repeaters.
-  * Best: user the repeater call sign and frequency
+    * Best: user the repeater call sign and frequency
-    * “VA3NUB listening on YRARC 123.456”
+      * “VA3NUB listening on YRARC 123.456”
   - If nothing back, wait 10 seconds and repeat step 2
   - If someone answers, acknowledge it.
-  * If you didn’t hear their call sign, ask them to repeat
+    * If you didn’t hear their call sign, ask them to repeat
-    * “This is VA3NUB. Can you repeat your call sign?”
+      * “This is VA3NUB. Can you repeat your call sign?”
-    * The other person will usually acknowledge your call sign and repeat his.
+      * The other person will usually acknowledge your call sign and repeat his.
-  * When you hear their call sign, acknowledge it
+    * When you hear their call sign, acknowledge it
-    * VA3HAM, this is VA3NUB. My name is George
+      * VA3HAM, this is VA3NUB. My name is George
   - Simple conversation starters:
-  * I’m testing my radio and repeater connection. How are you receiving me?
+    * I’m testing my radio and repeater connection. How are you receiving me?
-  * I’m new to this. I would appreciate any feedback on my radio usage.
+    * I’m new to this. I would appreciate any feedback on my radio usage.
-  * I’m located in Thornhill. What’s your location? (Note: ham operators will use QTH for location. Be polite, but try to avoid jargon/Qcodes)
+    * I’m located in Thornhill. What’s your location? (Note: ham operators will use QTH for location. Be polite, but try to avoid jargon/Qcodes)
-  *   - What equipment are you using?
+    *   What equipment are you using?
   - Closing up the conversation.
   * “VA3NUB  clear”. Or “VA3NUB out”
 This page was adapted from [[https://www.ylab.ca/repeaters/|External Link]]